Eco Friendly FFP2 Disposable Mask , Personal Safety Valved Dust
1 . Descriptions
Cup Mask use adjustable aluminum nose clip so it makes wearing more
sealless leakage ,use latex-free elastic strap , soft nose liner so
it make softer and fit the face .And use easy-breathing valve then
it makes breathing more smooth .
|Product Name||Respirator mask|
|Material||Non woven fabric|
|Style||With valve or without valve|
|Feature||Nose bar adaptable,hypoallergenic|
|FFP2 without valve||FFP2 with valve|
2 . Material of each layer
Outer layer : Protective needle punched cotton
Middle layde : FFP2 melt blown filter(have filter efficiency level
Inner layer : Shaped needle punched cotton
3. Directions for use
- The mask is for single use only.
- The mask should not be removed from its packaging until its
required for use.
- Use the respirator in accordance with applicable health and safety
- Fit the respirator and check leak-tightness before entering the
- Wear the respirator for the whole duration of exposure to
contaminants.It should not be used for more than 8 hours
continuously and should be discarded after use.
- Transport and stockage of unused masks should be such that the
product is not stored in direct sunlight and in frost free
conditions,not in contact with solvents and cannot be damaged by
physical contact with hard surfaces/items.
- As required by European Health and Safety requirements,the user is
advised that when the mask is in contact with the wearer’s skin,it
may cause allergic reaction to susceptible individuals.If this is
the case,leave the hazard area,remove the mask and seek doctor’s
4 . Expiry date
If maintained as per storage instructions , products can be used up
to 5 years from date of manufacture.
1. FFP2 dust mask has a better design
2. Dual fixed straps, adjustable metal nose band
3. Smooth inner lining ensuring a secure seal.
4. Loaded polypropylene material without any toxic, irritating,
5. High filtration and static electricity material to resist normal
toxic and ting micron particle.